PAL RTC/RSI Tools

Liquid Syringe Tools

The right syringe for every application

Dedicated tools for 57mm or 85mm syringe needle lengths available
Syringes available: 1.2µL / 5µL / 10µL /100µL / 250µL / 500µL / 1'000µL / 10'000µL

Headspace Tools

Constistent headspace sampling

Dedicated Tools for different syringe types available: 1mL / 2.5mL / 5mL (with corresponding tools)
Syringe temp. 40°C up to 150°C in 1°C steps
Syringe flush with inert gas flow through X-Y-Z rail
Magnetic vial transport for 2mL, 10mL and 20mL vials

The tool to increase productivity in SPME

Holder for all PAL SPME Arrows 1.1 or 1.5mm
Max. penetration depth 70mm
Easy exchange of SPME Arrow by hand
Best conditioning is achieved with the SPME Arrow Conditioning Module
SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB

The tool for fully automatic SPME sampling

New SPME holder for increased fiber protection
Compatible with a variety of SPME fibers
Easy fiber exchange by hand
For 10mm or 20mm fiber length
SPME Fibers are available with the following sorbents: PDMS, DVB, PA, Carbon WR, PDMS/Carbon WR, PDMS/Carbon WR/DVB

Powerful sample enrichment for GC

Rapid and sensitive enrichment of volatile and semi-volatile compounds from solid, liquid and gaseous samples
Powerful dynamic headspace extractions with Tenax TA trap, other materials available
Active cooling to minimize idle times
Temperature range: 40 - 350°C for efficient desorption
PAL Robotic Tool Changes enables head space, SPME and ITEX-sampling within one sequence
Watch ITEX Dynamic Tool Video or see ITEX brochure
ITEX method development: an open access article from Laaks et al. is available.

Rapid injection cycles with minimized carryover

The special design minimizes carryover even for the most sensitive detectors
Enables special injection techniques like sandwiching a sample between air gaps for accurate small volume injections
Flow control guarantees bubble-free solvent delivery
Position detection for zero dead volume positioning of syringe needle in the injector port

For efficient and accurate addition of larger amounts of liquids

For the addition of larger amounts of liquid: 100µL, 1mL (standard), 5mL & 10mL dispensing syringes available
With the special "transfer" mode also small volumes of liquids can be handled with high precision

Essential for Life Science, Clinical & Chemical Applications